PS3 Emulator [RPCS3] Quick Guide

Incl PS3 Emulator – Effective settings Easy – Boost FPS

ps3 rpcs3 emulator

Although the RPCS3 aka PS3 emulator is still in very early stage of development. But, as you know, people were dying for it since after the console release. It was released recently due to our guys getting crazy. :p Now the emulator was released but now it was configuration people were seeking. So guys here I come with the tested settings for PS3 emulator which I would definitely help you.

DISCLAIMER: Not all PS3 games are playable on current version of PS3 emulator. More games may support with further development. Still, you can test your luck.

Okay! Enough talking for now, lets move to our topic.

Hardware Requirements:

All hardware requirements are must. If your system lack any of it then I would’ve to recommend you to not to try, the emulator will not work [sorry!] :(.

  • x64 Bits OS, RPCS3 doesn’t work on 32 bit systems.
  • A CPU that supports SSSE3 (AMD: Bobcat, Bulldozer, Piledriver. Intel: Xeon 5100/5300/3000 Series, Core Duo/Extreme/ Quad, Core i7/i5/i3, Pentium Dual Core, Celeron 4xx Sequence Conroe-L, Celeron Dual Core E1200, Celeron M 500 series, Atom).
  • A dedicated Graphic Card that supports OpenGL 4.3 ( Nvidia GeForce 400 Series and newer, ATI Radeon HD 5000 Series and newer, Intel HD Graphics in Intel Haswell processors and newer).

Software Requirements:

Visual C++ Redistributable Packages for Visual Studio 2015.
RPCS3 Latest Build.
The PS3 Firmware (PS3UPDAT.PUP)
LLE Modules/Libraries: G-Drive

Installation:

  • Update Directx and install Visual C++ Redistributable.
  • Download RPCS3 Latest build extract it to a folder.
  • Download LLE Modules, extract inside RPCS3 folder.
  • Open rpcs3.exe go to Tools -> Install FIrmware, find PS3UPDAT.PUP that you downloaded before, let install.

Usage:

Launch RPCS3 with rpcs3.exe

To add games you can either install .PKG files from Boot -> Install PKG OR by copying the game PS3_GAME folder to \dev_hdd0\game\
(Where *game ID* is the exact ID without any dash or spaces)

For some games you also need a .RAP file they must be placed on:
\dev_hdd0\home\00000001\exdata\
Then you can launch the games by double clicking on right click Boot.

SETTINGS:

At this stage there aren’t really many settings to tweak. I’ll explain the most important
settings here. To start, go to Config -> Setting.

CORE:

PPU/SPU Decoders: We are given 3 options for each here:

  • Interpreter (Precise): Slowest but the most accurate emulation, use this if the game crashes.
  • Interpreter (Fast): The default setting, games should run faster on it at the expense of compatibility.
  • Recompiler (LLVM/ASMJIT): Fastest mode. Can achieve full speed on games where interpreter cannot. Also it takes a lot longer to start the game. It might not work for some games.

Load Libraries:
Some games require libraries (LLE Modules) to run (these are included on “Software requirements” 4). By default all should be disabled. You will only enable them when specific games need it. Though most games might need libsre, libresc, librtc and libspurs_jq.

GRAPHICS:

Render:

  • Null: Nothing, no video, you don’t want this.
  • OpelGL: The most compatible of all.
  • DRD12: DirectX12 mode it’s faster but requires windows 10 and compatible card (AMD/ NVIDIA).
  • Vulkan: Fast but requires a vulkan compatible card.
  • Aspect Ratio: Leave default 16×9.
  • Resolution: You should always try to run the games at the resolution they run on a real PS3. If unsure use 1280×720.
  • Frame Limit: Set on Auto.

All other options should be disabled, you can enable Vsync but for me it makes no difference
since we are already limiting frames.

AUDIO:
Doesn’t matter. Leave default XAudio2 or OpenAL. If sound is bad it’s most likely because
emulation is slow, this isn’t fault of the sound plugin at all.

INPUT/OUTPUT:
It enables/Disables peripheral support, since emulation is not good yet most of this are irrelevant now.
Pad handler should be set to Keyboard. It might seem like using XInput would allow you to use a gamepad but i was never able to get it to recognize mine.
Stick to “Keyboard” or use Xpadder to map the keys to your gamepad buttons.

MISC:
Select always start after boot, everything else disabled.

NETWORKING:
Set to disconnected.

SYSTEM:
I like to set it to English else the games might show up in Japanese. Some Japanese games
might need this setting set to “Japanese” to work.

CONFIG:
PAD Settings: Here configure your keys to your liking.

NEXT STEP-> If don’t have PS3 games, download here.

This guide was made possible due to the support of NICOBLOG [thanks, man!]

So this was all guys!!! If you have any problem, I’m always waiting to type reply! 🙂